Sunday, January 3, 2010

Just trying to keep moving forward.

I need to finish skinning the bottom of the rear fuselage, but I want to take the skins to our EAA chapter's metal brake to bend the flanges in my 3 skin pieces. However, the brake is in an unheated shed at a small urban farm and we have at least 2 feet of snow on the ground and it is cold. Gaining access to the brake is not in the near future. So, I'm cutting & fitting the forward skin pieces.


Click on image to enlarge

I cut and fit one side of the cockpit side skin and used it as a pattern to cut the 2nd side. No big deal, but progress was made.

1 comment: